Researchers have developed a new atomic clock method using superradiant atoms, which promises unprecedented precision in time measurement. This advancement, detailed in Nature Communications, could improve GPS accuracy, aid in space navigation, and enhance volcanic and earthquake monitoring. Credit: SciTechDaily.com
Superradiant atoms offer a groundbreaking method for measuring time with an unprecedented level of precision. In a recent study published by the scientific journal Nature Communications, researchers from the University of Copenhagen present a new method for measuring the time interval, seconds, that overcomes some of the limitations that even today’s most advanced atomic clocks encounter. This advancement could have broad implications in areas such as space exploration, volcanic monitoring, and GPS systems.
The second, which is the most precisely defined unit of measurement, is currently measured by atomic clocks in different places around the world that together tell us what time it is. Using radio waves, atomic clocks continuously send signals that synchronize our computers, phones, and watches.
Oscillations are the key to keeping time. In a grandfather clock, these oscillations are from a pendulum’s swinging from side to side every second, while in an atomic clock, it is a laser beam that corresponds to an energy transition in strontium and oscillates about a million billion times per second.
The luminous ball in the middle called a “magneto-optical trap” (MOT), consists of approximately 300 million strontium atoms suspended in a vacuum chamber cooled to just above absolute zero. This trap was used by researchers to develop new techniques for measuring time. Credit: Eliot Bohr
However, according to PhD fellow Eliot Bohr from the Niels Bohr Institute, even atomic clocks could become more precise. This is because the detection laser, used by most modern atomic clocks to read the oscillation of atoms, heats up the atoms so much that they escape, thus degrading precision.
“Because the atoms constantly need to be replaced with fresh new atoms, while new atoms are being prepared, the clock loses time ever so slightly. Therefore, we are attempting to overcome some of the current challenges and limitations of the world’s best atomic clocks by, among other things, reusing the atoms so that they don’t need to be replaced as often,” explains Bohr who was employed at the Niels Bohr Institute when he did the research, but who is now PhD fellow at the University of Colorado.
Superradiance and Cooling to Absolute Zero
The current methodology consists of a hot oven that spits roughly 300 million strontium atoms into an extraordinarily chilly ball of cold atoms known as a magneto-optical trap, or MOT. The temperature of these atoms is approximately -273 °C – very near absolute zero – and there are two mirrors with a light field in between them to enhance the atomic interactions. Bohr and his research colleagues developed a new method to read out the atoms.
“When the atoms land in the vacuum chamber, they lie completely still because it is so cold, which makes it possible to register their oscillations with the two mirrors at opposing ends of the chamber,” explains Bohr.
Eliot Bohr (left) and colleague Sofus Laguna Kristensen starting the experiments at the Niels Bohr Institute. Credit: Ola J. Joensen, NBI.
The reason why the researchers don’t need to heat the atoms with a laser and destroy them is thanks to a quantum physical phenomenon known as ‘superradiance’. The phenomenon occurs when the group of strontium atoms is entangled and at the same time emits light in the field between the two mirrors.
“The mirrors cause the atoms to behave as a single unit. Collectively, they emit a powerful light signal that we can use to read out the atomic state, a crucial step for measuring time. This method heats up the atoms minimally, so It all happens without replacing the atoms, and this has the potential to make it a more precise measurement method,” explains Bohr.
GPS, Space Missions and Volcanic Eruptions
According to Bohr, the new research result may be beneficial for developing a more accurate GPS system. The roughly 30 satellites that constantly circle Earth and tell us where we are need atomic clocks to measure time.
“Whenever satellites determine the position of your phone or GPS, you are using an atomic clock in a satellite. The precision of the atomic clocks is so important that if that atomic clock is off by a microsecond, it means an inaccuracy of about 100 meters on the Earth’s surface,” said Bohr.
More precise atomic clocks could also have a significant impact on future space missions.
“When people and crafts are sent out into space, they venture even further away from our satellites. Consequently, the requirements for precise time measurements to navigate in space are much greater,” he says.
The result could also be helpful in the development of a new generation of smaller, portable atomic clocks that could be used for more than “just” measuring time.
“Atomic clocks are sensitive to gravitational changes and can therefore be used to detect changes in Earth’s mass and gravity, and this could help us predict when volcanic eruptions and earthquakes will occur,” says Bohr.
Although very promising, Bohr emphasizes that this new method of using superradiant atoms is still a “proof of concept” that needs further refinement.
Reference: “Collectively enhanced Ramsey readout by cavity sub- to superradiant transition” by Eliot A. Bohr, Sofus L. Kristensen, Christoph Hotter, Stefan A. Schäffer, Julian Robinson-Tait, Jan W. Thomsen, Tanya Zelevinsky, Helmut Ritsch and Jörg H. Müller, 5 February 2024, Nature Communications.
DOI: 10.1038/s41467-024-45420-x
